ESENRU
Order item
Cart →
4 PETG weight plates of 125 g, 87 mm across, for a 28 mm dumbbell bar

3D printing

4 × 125 g weight plates for 28 mm dumbbell bars

Pack of 4 fractional weight plates, 125 g each, for dumbbells with a 28 mm bar. Placing two on each side, you add 500 g in total to the dumbbell. FEATURES - Contents: 4 plates - Nominal weight: 125 g per plate, 500 g per pack - Outer diameter: 87.2 mm - Thickness: 20 mm - Centre hole: 28.8 mm - Compatibility: 28 mm dumbbell bars - Material: PETG shell with plaster filling - Weight tolerance: up to 10% Microloading helps you avoid big jumps in weight in strength training, home workouts and rehabilitation. Before you buy, measure your bar diameter to make sure it is 28 mm.

$1 800

In stock

Colour:
Material
PETG
Size
87 × 87 × 21 mm

Pickup and delivery

Pick it up at the workshop or get it by Uber courier, paid by you according to distance. Pickup point on the map ↗

4 × 125 g weight plates for 28 mm dumbbell bars: frequently asked questions

What comes in the pack of 4 × 125 g weight plates?

The pack contains 4 fractional plates of 125 g each, 500 g in total. Each plate is 87.2 mm across and 20 mm thick, with a 28.8 mm hole for a 28 mm dumbbell bar. The bar is not included.

How do I use 4 × 125 g plates to progress gradually?

With 4 × 125 g plates you load the dumbbell in two steps: one per side adds 250 g, and two per side add 500 g. The load grows 250 g at a time, without the big jumps that heavier plates give.

What is the difference between the 4 × 125 g pack and the 2 × 250 g pack?

Both packs add 500 g, but the 4 × 125 g pack gives you an in-between 250 g step and smaller 87.2 mm plates. Two per side take 40 mm of bar; the 2 × 250 g pack takes 20 mm per side with 120 mm plates.

Will two 125 g plates per side fit on my dumbbell?

Two 125 g plates on the same side take up 40 mm of bar, since each one is 20 mm thick. Measure the free length and the diameter of your bar: the plates are for 28 mm dumbbell bars, with a 28.8 mm hole.

What are the 125 g fractional plates made of?

The 125 g fractional plates are 3D-printed PETG shells with plaster filling, designed and printed in Montevideo. Each plate's nominal weight has a tolerance of up to 10%, and the layer texture is visible.

How do I order the 4 × 125 g plate pack?

Add the 4 × 125 g pack to the cart in the colour you want and send the cart via WhatsApp or Telegram with the order code. You talk directly to the maker and we arrange delivery in Montevideo; if it is out of stock, it is printed to order.

WhatsApp Order item