ESENRU
Order item
Cart →
2 PETG weight plates of 125 g, 87 mm across, for a 28 mm dumbbell bar

3D printing

2 × 125 g weight plates for 28 mm dumbbell bars

Pack of 2 fractional weight plates, 125 g each, for dumbbells with a 28 mm bar. Placing one on each side, you add 250 g in total to the dumbbell. FEATURES - Contents: 2 plates - Nominal weight: 125 g per plate, 250 g per pack - Outer diameter: 87.2 mm - Thickness: 20 mm - Centre hole: 28.8 mm - Compatibility: 28 mm dumbbell bars - Material: PETG shell with plaster filling - Weight tolerance: up to 10% Microloading helps you avoid big jumps in weight in strength training, home workouts and rehabilitation. Before you buy, measure your bar diameter to make sure it is 28 mm.

$900

In stock

Colour:
Material
PETG
Size
87 × 87 × 21 mm

Pickup and delivery

Pick it up at the workshop or get it by Uber courier, paid by you according to distance. Pickup point on the map ↗

2 × 125 g weight plates for 28 mm dumbbell bars: frequently asked questions

What comes in the pack of 2 × 125 g weight plates?

The pack contains 2 fractional plates of 125 g each, 250 g in total. Each plate is 87.2 mm across and 20 mm thick, with a 28.8 mm hole for a 28 mm dumbbell bar. The bar is not included.

What is a 250 g microload on a dumbbell good for?

A 250 g microload lets you raise the dumbbell weight without big jumps: with the 2 × 125 g pack, one plate on each side, you add only 250 g. It helps keep progression controlled in strength training, home workouts and rehabilitation.

Pack of 2 × 125 g plates or a single 250 g plate?

Both add 250 g, but the 2 × 125 g pack splits the weight with one plate on each side of the dumbbell, while a single 250 g plate sits on one side only. The 125 g plates are also smaller: 87.2 mm versus 120 mm.

What are the dimensions of the 125 g plates in the pack?

Each 125 g plate in the pack is 87.2 mm across and 20 mm thick. The centre hole is 28.8 mm, made for 28 mm dumbbell bars, so measure your bar before you buy.

How much does each 125 g plate really weigh?

Each plate has a nominal weight of 125 g with a tolerance of up to 10%, because the weight comes from the plaster filling inside the 3D-printed PETG shell. The full pack adds up to a nominal 250 g.

What colours can I order the 2 × 125 g pack in?

The 2 × 125 g pack can be ordered in white, blue, violet, black or grey; you choose the colour on the product page. We confirm it with you before printing, so if you want a different shade, ask when you send the order.

WhatsApp Order item