Printed parts
Parts that are already designed
Things we were asked for so often that we keep them modelled. You pick, we print, we bring it over.
Every part on this list came out of a real request from a home in Montevideo. The design is done, so the price is fixed and the work is only the printing.
On the list
Weight plates for 28 mm dumbbell bars
125 g fractional weight plate for dumbbells with a 28 mm bar. It lets you microload and increase the weight gradually in strength training, home workouts and rehabilitation. FEATURES - Nominal weight: 125 g per plate - Outer diameter: 87.2 mm - Thickness: 20 mm - Centre hole: 28.8 mm - Compatibility: 28 mm dumbbell bars - Material: PETG shell with plaster filling - Weight tolerance: up to 10% With two plates, one on each side, you add only 250 g in total to the dumbbell. This small increment helps you avoid big jumps in load and keep your progression more controlled. This listing is for 1 plate of 125 g. Before you buy, measure your bar diameter to make sure it is 28 mm. For bigger increases, the 250 g plate, 120 mm in diameter, is also available.
PETG · 87 × 87 × 21 mm
from $450
Order yours
Wet cat food pouch dispenser
Dispenser and organiser for wet cat food pouches. It keeps the pouches in a tidy column and lets you take the bottom one out from the front tray. CAPACITY - 6 pouches inside the dispenser - 1 extra pouch ready to take from the tray FEATURES - Outer dimensions: 13 cm wide, 14.5 cm long and 11 cm high - For pouches up to 100 x 130 x 12 mm - Front and side windows to see how many pouches are left - Loads from the top, dispenses from the bottom - Front tray with an opening to take the pouch out easily - Removable lid - Material: PETG in violet, blue and grey; PETG-CF in black; PLA in white - Colour: white The listing includes 1 complete dispenser: base with tray and lid. The food pouches shown in the photos are not included. Before you buy, measure your pouches. The maximum compatible size is 100 x 130 x 12 mm.
PETG · 145 × 130 × 110 mm
$1 990
Order yours
Pegboard organizers
Casitio modular organizer that keeps 6 bits in sight and makes good use of the space on a tool wall. FEATURES - Capacity: 6 hex insert bits, 1/4 inch - Diameter of each slot: 7.8 mm - Module size: 80 x 18.5 x 29 mm - Material: 3D-printed PETG - Visible texture typical of 3D printing - Two rear hooks and a side joint for adding more modules COMPATIBILITY Designed for panels with vertical oval slots of about 5 x 15 mm, arranged in a staggered grid with 20 mm between centres. Before buying, measure the slots and spacing of your panel. The listing includes 1 organizer. The panel, bits and tools shown in the images are not included. Product designed and made by Casitio; the image shows an illustrative setting.
PETG · 80 × 19 × 29 mm
from $590
Order yours
Pegboard hooks
Pack of 6 Casitio hooks for hanging tools, cables and light accessories on a pegboard. FEATURES - Usable reach: 40 mm, with an upward-curved tip so the hanging item does not slip off by itself - Size of each hook: 47 x 57 x 4.4 mm - Recommended load: up to 3 kg per hook - Material: 3D-printed PETG - Visible texture typical of 3D printing - Spring latch: once fitted, the hook does not lift off when you take the tool down; to remove it, press the tab COMPATIBILITY Designed for panels with vertical oval slots of about 5 x 15 mm, arranged in a staggered grid with 20 mm between centres. Each hook takes two slots in the same column. Before buying, measure the slots and spacing of your panel. The listing includes 6 hooks. The panel and tools shown in the images are not included. Product designed and made by Casitio; the image shows an illustrative setting.
PETG · 40 × 4 × 0 mm
from $330
Order yours
WD-40 spray can holder for pegboard
A Casitio holder that keeps your spray lubricant within reach, hanging on the panel instead of taking up space on the workbench. FEATURES - For cylindrical cans up to 53 mm in diameter (300 ml WD-40 and similar) - The can drops in from the top and rests on an internal conical seat - Side windows: you can see how much is left and grab the can with your fingers - Four reinforced rear hooks, spread over two rows - Size: 60 x 58 x 60 mm - Material: 3D-printed PETG COMPATIBILITY Designed for panels with vertical oval slots of approximately 5 x 15 mm, arranged in a staggered grid with 20 mm between centres. Before buying, measure the slots of your panel and the diameter of your can. The listing includes 1 holder. The panel and spray can shown in the pictures are not included. Product designed and made by Casitio; the image shows an illustrative setting.
PETG · 60 × 58 × 60 mm
$330
Order yours
Pegboard kit
A Casitio kit to set up your tool corner on a pegboard in one go. CONTENTS - 1 holder for spray cans up to 53 mm in diameter - 1 organizer with 6 slots of 7.8 mm for 1/4 inch bits - 1 organizer with 4 slots of 12 mm for accessories Both organizers measure 80 x 29 mm and join together with the side interlock. Material: 3D-printed PETG, with its characteristic layer texture. COMPATIBILITY Designed for panels with vertical oval slots of approximately 5 x 15 mm, arranged in a staggered grid with 20 mm between centres. Before buying, measure the slots and spacing of your panel. The listing includes 3 pieces. The panel, spray can and tools shown in the pictures are not included. Product designed and made by Casitio; the image shows an illustrative setting.
PETG · 80 × 60 × 60 mm
from $980
Order yours
20 × 20 cm Tool Pegboard Panel Kit
Compact 200 × 200 × 5 mm wall panel kit for organizing tools and accessories. The panel has staggered 5 × 15 mm vertical slots on a 20 mm grid and four 5 mm mounting holes. The kit includes two single, one double, and one quadruple 15 mm wall spacers, allowing this panel to be installed now and aligned with adjacent panels later. Made from 3D-printed PETG and compatible with Casitio PP organizers, holders, and hooks. Screws, wall plugs, accessories, and tools are not included.
PETG · 200 × 200 × 5 mm
$1 200
Order yours
Pack of 10 Todo List Stencils
Pack of 10 reusable stencils for drawing neat todo lists in seconds. Each 85 x 40 x 1 mm stencil marks six checkboxes and six writing lines. The 1.5 mm slots work with ballpoint pens, mechanical pencils, and fine-tip markers. Made from 3D-printed plastic, with a 4 mm hole for a ring; it can also be used as a bookmark. The pack contains ten stencils in the selected color. Notebook, pen, and ring are not included.
PETG · 85 × 40 × 1 mm
$690
Order yours
M.2 SSD Extension Adapter 2230/2242/2260 to 2280
Adapter for mounting a short M.2 SSD (2230, 2242 or 2260) in a motherboard or laptop slot designed for 2280. The SSD rests on the plate and is fixed with an M2 screw through the included shouldered washer; the far end takes the original 2280 standoff screw. Side rails keep the SSD aligned, break-off lines shorten the plate for 2242 and 2260, and the 3.5 mm end slot follows the M.2 standard. 55 x 24.7 x 3.2 mm, 3D-printed PETG. SSD and screws not included.
PETG · 55 × 24 × 3 mm
$400
Order yours
Pegboard holder for a pair of work gloves
Modular holder for hanging a pair of work gloves on a pegboard. Slide each cuff into its own tapered slot from the front; the fingers hang below. The module measures 80 x 44.6 x 70 mm including its four rear hooks. Slot spacing is 40 mm; each opening narrows from 10.5 mm at the front to 3.5 mm at the back. Side joints let you add matching modules. Made of 3D-printed PETG with visible layer texture. Designed for panels with roughly 5 x 15 mm vertical oval slots on a staggered 20 mm grid. Measure your panel and the thickness of a folded cuff before buying; grip depends on the glove material and thickness. Includes one holder. Pegboard and gloves are not included.
PETG · 80 × 44 × 70 mm
$590
Order yours
Ø50 mm Silica Gel Container with Indicator Beads
Compact round container for silica gel beads, for filament dry boxes, drawers and cases. The wall and lid are a 1.6 mm diamond lattice: air flows through and 2-5 mm beads stay inside. Flush press-fit lid with a fingernail notch. About 32 cm3 of usable volume. Ø50 x 30 mm, white 3D-printed PETG. Indicator silica gel beads included.
PETG · 50 × 50 × 30 mm
$390
Order yours
Corner silica gel container
Quarter-circle container for silica gel beads that fits the corner of a filament dry box or drawer. Walls and lid are a 1.6 mm diamond lattice: air flows through and 2-5 mm beads stay inside. Flush press-fit lid with a fingernail notch. About 65 cm3 of usable volume. 50 x 50 x 50 mm, white 3D-printed PETG. Indicator silica gel beads included.
PETG · 50 × 50 × 50 mm
from $520
Order yours
Available colours depend on what is in stock; we confirm them when taking the order.
Order yours
Write to us with the name of the part and we will confirm price, colour and lead time.
Order the part
Leave the part here and we carry on in chat with the file already in hand — no sending it twice.
How to order
Pick the part
Write to us with the name of what you want and the colour.
We print it
We confirm the lead time when we take the order, based on what is in the queue.
You get it
We bring it along with a visit, or arrange delivery within Montevideo.
Not what you were looking for?
We design it from scratch from a photo and a few measurements, and give you a price range before starting.