
3D printing
M.2 SSD Extension Adapter 2230/2242/2260 to 2280
Adapter for mounting a short M.2 SSD (2230, 2242 or 2260) in a motherboard or laptop slot designed for 2280. The SSD rests on the plate and is fixed with an M2 screw through the included shouldered washer; the far end takes the original 2280 standoff screw. Side rails keep the SSD aligned, break-off lines shorten the plate for 2242 and 2260, and the 3.5 mm end slot follows the M.2 standard. 55 x 24.7 x 3.2 mm, 3D-printed PETG. SSD and screws not included.
$400
In stock
- Material
- PETG
- Size
- 55 × 24 × 3 mm
Pickup and delivery
Pick it up at the workshop or get it by Uber courier, paid by you according to distance. Pickup point on the map ↗
M.2 SSD Extension Adapter 2230/2242/2260 to 2280: frequently asked questions
Can I fit an M.2 2230 SSD in a 2280 slot with this?
Yes: the M.2 SSD extension adapter lets you install a 2230, 2242 or 2260 SSD in a motherboard or laptop slot designed for 2280. The SSD rests on the plate and is fixed with an M2 screw; the far end of the adapter takes the original 2280 standoff screw.
How do I use it with a 2242 or 2260 SSD?
For a 2242 or 2260 SSD you shorten the adapter at its break-off lines, snapping them with pliers or a craft knife. With a 2230 SSD you use the full plate. Either way the SSD sits between the side rails, so it stays aligned and does not shift.
What screw do I need to fix the SSD to the adapter?
The SSD needs an M2 screw with a 3.4 mm raised countersunk head and 3 mm length, going through the included shouldered washer that centres the SSD in its notch. Screws are not included; the 2280 end uses your board's original standoff screw.
Will the M.2 adapter fit in my laptop or motherboard?
Check that there is 1.35 mm of free space on each side of the SSD next to the slot: the adapter measures 55 x 24.7 x 3.2 mm and is slightly wider than the card. If another M.2 slot or a heatsink sits right beside it, measure that gap before buying.
Does it work with 3 mm standoffs or M3 screws?
Yes. The adapter's end slot is 3.5 mm wide, following the M.2 standard, so it fits standoffs with a 3 mm shoulder as well as M2 or M3 screws. The slot is open towards the end and is clamped with the original 2280 standoff screw.
What comes with the M.2 SSD adapter and what is it made of?
You get 1 adapter and 1 washer for the SSD screw. The SSD and the screws are not included. The plate is 3D printed in PETG, with side rails and break-off lines for 2242 and 2260 drives.
How do I buy the adapter and where is it delivered?
Add it to the cart and send the order via WhatsApp or Telegram with the order code; you deal directly with the maker in Spanish, English or Russian. We design and print it in our Montevideo workshop and arrange delivery within Montevideo.



